|
Help Forum |
 |
|

Efoylan

|
4/15/2012 | |
So ive been doing some research and apparently theres a "dragon norn" for C1 that looks so awesome, but isnt available for download because the creator didnt want it going around. Anyways, i went on a german site that had this download, and when i got the files i noticed the .spr's and .att's are the same as the wood norns that i downloaded earlier. After more research i found that these dragon norns use slot 8, aswell as the pixie and wood norns. When i tried to import them, they came as ron norns :s
My questions: is there anyway i can clear slot 8 for the dragon norns, if so where and how would i do that? And does anyone else have the original dragon norns for C1? |

Malkin
     Manager

|
4/15/2012 | |
The original dragon norns are just an older version of the dragon norns available at Creatures Unlimited.
What breeds do you have installed in slot 8?
My TCR Norns |

Efoylan

|
4/15/2012 | |
Pixie and wood norns from what i understand, how do i check for sure? |

Malkin
     Manager

|
4/15/2012 | |
Slot 8 is for addon breeds only - and you can only have 1 breed in each slot. if you import a wood norn and it looks like anything else, you don't have the wood norns installed.
I would suggest you just install the ATT files and SPR files for the dragon norns wherever the other ATT and SPR files are stored.
My TCR Norns |

Efoylan

|
4/16/2012 | |
Thanks Malkin, ill try that and see if it works
---
So i did everything right, but the dragon norns came out as wood norns.... help?
---
UPDATE*** I finally got the files working |

Norngirl
  

|
4/18/2012 | |
Good to hear you finaly got them working - theyre truly pretty!
but sadly I haven't been able to keep my dragon norns alive - everytime I tried they got sick or unable to eat enough and never make it to even childhood
-_- Just thought I might add this if that would maybe be the next question popping up XD
*is going to try again - could be me with my unlucky world I had in C1)
sorry to bump this ^^'
|